Why is my grill not getting hot – reasons and solutions

In our article, we will discuss how to use a grill properly and solve problems regarding its maintenance. The most important question is how to make the grill hotter without harming your barbecue. For this aim, there will be some solutions in the article that allow to avoid burning and overheating.

So, you need to do some things that increase the efficiency of usage and gas supply as well. It directly affects what type of food you cook. Hence, the information helps people to gain delicious food through the grill. Also, don’t forget to check the propane tank before starting.

Well, firstly it is necessary to find out the reasons for the improper performance of the grill. Often it is referred to technical problems in the gas grill and now we should look at the below data about the gas grill and its issues, for example, gas leak.

Why is my grill not getting hot

Why will not our gas grill get hot enough?

Generally, there can be several issues which do not allow our grill to be heated properly for cooking the barbeque. But let’s list some of them below. By the way, you should control the propane tank.

1. Kinked hose

This is the first reason for low temperature when gas flow is blocked due to a clogged hose. This trouble can be a single cause that prevents the grill from being hot enough. In this case, consumers should test the hose and the gas line to escape any kinks. So, also observe the possibility of a gas leak.

Why is my grill not getting hot

2. Faulty gas grill regulator 

Another cause can be defective gas grill regulator and that’s why people should reset it. And it really helps to solve the problem of low temperature. After that gas supply will be hot enough.

3. Unblock the grill burner tube

Consumer’s gas grill can have an issue with getting hot enough and one of the troubles might be a blocked grill burner tube. It is important to use an effective burner with even flames. Therefore, you should clean this component regularly to make the gas grill hotter and the burner tubes as well.

Why is my grill not getting hot

How do I make my grill hotter?

If the state of the equipment is excellent, just prepare a gas grill for cooking food. But also you should know DIY ways to make it hotter. Below you can find it in detail. By the way, don’t allow gas leaks.

Add grill bricks

Putting grill bricks around the grill will raise the temperature of the barbecue since the material conducts the heat very well from the gas, that’s why it adds more energy to the process of cooking and through it dishes will be cooked faster. But it is enough to pile the bricks in one layer to make even heating. Meanwhile, control the propane tank valve.

Why is my grill not getting hot - reasons and solutions

Use lava rocks

This type of heating material enhances the performance of a gas grill. Lava rocks are more efficient in radiating heat than a usual flame that goes from the burner. Apart from it, lava rocks prevent gas grill’s burners from gas leaks, grease, and oil when you cook food. By the way, before people switch on the propane tank valve, they should turn on the control knobs.

Below you can follow the stages to put the rocks into the grill:

  • First of all, the burners should be covered by expandable grates since it is enough for the rocks to form a solid layer on the high part of them.
  • Then put away the cooking grates you already use on the grill and cover the burners with newly bought expandable grates. Besides it, generally, it is a safety device although it uses propane gas.
  • Put a solid layer of lava rocks on the grates. After that remove the used cooking grates and switch the burners on. Then close the lid of the grill when it is heating.
  • The time will take around twenty minutes to gain a temperature of at least five hundred degrees F. The propane gas will help to achieve grill temperature.

Also note that the lava stone will be covered with fat after several uses, so that’s why you should flip it over when it will be needed. By the way, don’t forget to check the gas cylinder regularly.

Why is my grill not getting hot - reasons and solutions

Turn up the heat

While the grill is clean, consumers could increase the quantity of gas to fire it up or apply the button of the grill to raise the heat. Apart from it, the gas valve and the gas tank should be in the proper state.

As for vegetables, people should cook them at a lower temperature that’s why turn the heat down for them.

Why is my grill not getting hot - reasons and solutions

Preheat your grill properly

Consumers need to use the grill correctly. Apart from it, they should ensure that it is hot and also food is baked correctly and evenly. The process of cooking the barbecue takes around 20 minutes. Actually, the grill provides a gas cylinder and gas hose that allow it to support low flames from the gas tank.

Apply tin foil to wrap the food

Another useful method is the usage of tin foil to wrap the food. Through it, we can get a suitable temperature for the meat inside it. The heat will come uniformly to the barbecue and the food will heat up quicklier. Meanwhile, always check the gas hose entity.

But, note that your meal can be burned if the grill temperature is too high, that’s why pay attention to this point. It helps the device work properly.

Why is my grill not getting hot - reasons and solutions

Keep your grill in excellent condition

To achieve it, people should take care of a gas grill. For this aim wash it after each use to avoid fires caused by dry residue and grease. Also, remember that to remove the dirty particles is better when it is still hot. By the way, you can fix low flame through a control panel.

Your device should be in an off position with the grill’s regulator to save energy, enough heat, and enough gas with a temperature gauge.

Why is my grill not getting hot - reasons and solutions

Why is my char broil grill not getting hot enough?

If such a problem exists try to clean burner ports with a grill brush to unclog the space and remove the drippings as well. Then try to turn on the grill’s regulator to make sure that it works correctly. Meanwhile, you can regulate the correct temperature with a temperature gauge.

How do you reset a grill regulator?

We would like to offer the next algorithm for the gas grill to avoid a gas leak and other issues.

Step 1

Use a gas grill regulator with control knobs to switch off the gas at the tank.

Step 2

To heat properly later you should disconnect the hose from the tank. 

Step 3

Open the grill lid. Also, remember about control knobs.

Step 4

Turn all valves of the burner to high.

Step 5

Then wait for several minutes.

Step 6

Switch off all the burner valves.

Step 7

Connect the gas line back up to the propane tank.

Step 8

Switch on the propane tank slowly.

Step 9

Start the grill using the correct ignition.

Why is my grill not getting hot - reasons and solutions

Why does my grill only get to 250 degrees?

This can be found out with a temperature gauge and we need to say that it is a serious problem since usually, most grills can heat up to 500 degrees F in 10 minutes. So, why does not the gas grill reach temperatures?

It is clear that all devices decrease in work over time but gas grills should perform all time hot. And if they take a temperature of only about 250 degrees, we should know the basic reasons for it. How hot enough and how getting hot – these are common questions. 

Below you can find follow:

  • A defective gas temperature gauge
  • Near-empty or an empty propane tank
  • Gas leaks from the grill’s regulator tube
  • Low flames made by burners
Why is my grill not getting hot - reasons and solutions

FAQ

This block of information helps to understand common questions and solutions about getting the gas grill hotter and its proper performance.

How do you fix a low flame on a gas grill?

First of all, switch off the device and the gas flow too. Then put away the gas grill regulator from the tank of propane and give it idle for around five minutes.

Now connect the gas regulator again to the propane tank and open the valve not fast and completely. After that wait around thirty seconds and later try to light the grill on the back. Generally, it should help to fix the problem.

Why doesn’t my Weber grill get hot enough?

The main reason for it is an activation of the bypass safety mechanism on the gas regulator. To fix this problem, you need to turn on the gas in the tank and then wait about 2 minutes while the pressure in the hose and the tank will equalize.

Later switch on the burner tubes and light them as typical. Take care of normal operation and proper maintenance of grill parts. It should always help with getting hot.

How do we know if our gas grill regulator is going bad?

People should know that an evident indicator of this issue is it becomes worse over time. And it is important to define the problem in time to solve it in a short time. Any gas grills will perform low heat after a long time.

How can I make a charcoal grill hotter?

Yes, you can. It is possible if you will regulate the airflow, you can achieve charcoal grills hot for barbecue. By the way, people need to know grill parts for proper maintenance.

The getting hotter is possible through a vent that is located on the bottom of the device but only not in gas grills. Regulating the vent you can add more air or decrease it as a low flame on the contrary. Also, you need to ensure that the vent is open when you start to light the charcoal grill.

Why is my grill not getting hot - reasons and solutions

Final Thoughts 

Hope, our information allows you to know how to make the gas grill hotter since now you are aware of the above ways of solving the problems. To summarize, people need to check that their gas grill is not heated enough for technical reasons.

If you have any questions, leave comments here and share the article with your friends. Thank you a lot for reading!

Leave a Comment